World Library  
Flag as Inappropriate
Email this Article


Article Id: WHEBN0004311867
Reproduction Date:

Title: Cpuid  
Author: World Heritage Encyclopedia
Language: English
Subject: Page Size Extension, Pentium M, Athlon, Machine code, Stepping level
Collection: MacHine Code, X86 Architecture
Publisher: World Heritage Encyclopedia


The CPUID opcode is a processor supplementary instruction (its name derived from CPU IDentification) for the x86 architecture allowing software to discover details of the processor. It was introduced by Intel in 1993 when it introduced the Pentium and SL-enhanced 486 processors.[1]

By using the CPUID opcode, software can determine processor type and the presence of features (like MMX/SSE). The CPUID opcode is 0Fh, A2h (as two bytes, or 0FA2h as a single word) and the value in the EAX register, and in some cases the ECX register, specifies what information to return.


  • History 1
  • Calling CPUID 2
    • EAX=0: Highest Function Parameter 2.1
    • EAX=0: Get vendor ID 2.2
    • EAX=1: Processor Info and Feature Bits 2.3
    • EAX=2: Cache and TLB Descriptor information 2.4
    • EAX=3: Processor Serial Number 2.5
    • EAX=4 and EAX=Bh: Intel thread/core and cache topology 2.6
    • EAX=7, ECX=0: Extended Features 2.7
    • EAX=80000000h: Get Highest Extended Function Supported 2.8
    • EAX=80000001h: Extended Processor Info and Feature Bits 2.9
    • EAX=80000002h,80000003h,80000004h: Processor Brand String 2.10
    • EAX=80000005h: L1 Cache and TLB Identifiers 2.11
    • EAX=80000006h: Extended L2 Cache Features 2.12
    • EAX=80000007h: Advanced Power Management Information 2.13
    • EAX=80000008h: Virtual and Physical address Sizes 2.14
  • CPUID usage from high-level languages 3
  • CPU-specific information outside x86 4
  • See also 5
  • References 6
  • External links and documentation errata 7


Prior to the general availability of the CPUID instruction, programmers would write esoteric machine code which exploited minor differences in CPU behavior in order to determine the processor make and model.[2][3]

Outside the x86 family, developers are mostly still required to use esoteric processes to determine the variations in CPU design that are present. While the CPUID instruction is specific to the x86 architecture, other architectures (like ARM) often provide on-chip registers which can be read to obtain the same sorts of information provided by this instruction.

Calling CPUID

In assembly language the CPUID instruction takes no parameters as CPUID implicitly uses the EAX register to determine the main category of information returned. In Intel's more recent terminology, this is called the CPUID leaf. CPUID should be called with EAX = 0 first, as this will return in the EAX register the highest EAX calling parameter (leaf) that the CPU supports.

To obtain extended function information CPUID should be called with the most significant bit of EAX set. To determine the highest extended function calling parameter, call CPUID with EAX = 80000000h.

CPUID leaves greater than 3 but less than 80000000 are accessible only when the model-specific registers have IA32_MISC_ENABLE.BOOT_NT4 [bit 22] = 0 (which is so by default). As the name suggests, Windows NT4 did not boot properly unless this bit was set,[4] but later versions of Windows do not need it, so basic leaves greater than 4 can be assumed visible on current Windows systems. As of July 2014, basic valid leaves go up to 14h, but the information returned by some leaves are not disclosed in publicly available documentation, i.e. they are "reserved".

Some of the more recently added leaves also have sub-leaves, which are selected via the ECX register before calling CPUID.

EAX=0: Highest Function Parameter

Here is a list of processors and the highest function supported.

Highest Function Parameter
Processors Basic Extended
Earlier Intel 486 CPUID Not Implemented
Later Intel 486 and Pentium 0x01 Not Implemented
Pentium Pro, Pentium II and Celeron 0x02 Not Implemented
Pentium III 0x03 Not Implemented
Pentium 4 0x02 0x8000 0004
Xeon 0x02 0x8000 0004
Pentium M 0x02 0x8000 0004
Pentium 4 with Hyper-Threading 0x05 0x8000 0008
Pentium D (8xx) 0x05 0x8000 0008
Pentium D (9xx) 0x06 0x8000 0008
Core Duo 0x0A 0x8000 0008
Core 2 Duo 0x0A 0x8000 0008
Xeon 3000, 5100, 5200, 5300, 5400 series 0x0A 0x8000 0008
Core 2 Duo 8000 series 0x0D 0x8000 0008
Xeon 5200, 5400 series 0x0A 0x8000 0008
Atom 0x0A 0x8000 0008
Core i7 0x0B 0x8000 0008

EAX=0: Get vendor ID

This returns the CPU's manufacturer ID string – a twelve-character ASCII string stored in EBX, EDX, ECX (in that order). The highest basic calling parameter (largest value that EAX can be set to before calling CPUID) is returned in EAX.

The following are known processor manufacturer ID strings:

For instance, on a GenuineIntel processor values returned in EBX is 0x756e6547, EDX is 0x49656e69 and ECX is 0x6c65746e. The following code is written in GNU Assembler for the x86-64 architecture and displays the vendor ID string as well as the highest calling parameter that the CPU supports.


        .asciz  "Largest basic function number supported: %i\n"
        .asciz  "Vendor ID: %.12s\n"


        .align  32
        .globl  _start
        pushq   %rbp
        pushq   %rbx
        movq    %rsp,%rbp
        subq    $16,%rsp

        xorl    %eax,%eax

        movl    %ebx,0(%rsp)
        movl    %edx,4(%rsp)
        movl    %ecx,8(%rsp)

        movq    $s0,%rdi
        movl    %eax,%esi
        xorb    %al,%al
        call    printf

        movq    $s1,%rdi
        movq    %rsp,%rsi
        xorb    %al,%al
        call    printf

        movq    %rbp,%rsp
        popq    %rbx
        popq    %rbp
        movl    $1,%eax
        int     $0x80

EAX=1: Processor Info and Feature Bits

This returns the CPU's stepping, model, and family information in EAX (also called the signature of a CPU), feature flags in EDX and ECX, and additional feature info in EBX.

The format of the information in EAX is as follows:

  • 3:0 – Stepping
  • 7:4 – Model
  • 11:8 – Family
  • 13:12 – Processor Type
  • 19:16 – Extended Model
  • 27:20 – Extended Family

Intel and AMD have suggested applications to display the family of a CPU as the sum of the "Family" and the "Extended Family" fields shown above, and the model as the sum of the "Model" and the 4-bit left-shifted "Extended Model" fields.[5] If "Family" is lower than 15, only the "Family" and "Model" fields should be used while the "Extended Family" and "Extended Model" bits are reserved. If "Family" is set to 15, then "Extended Family" and the 4-bit left-shifted "Extended Model" should be added to the respective base values.[6][7]

The processor info and feature flags are manufacturer specific but usually the Intel values are used by other manufacturers for the sake of compatibility.

As of January 2011, the standard Intel feature flags are as follows[8][9]
EAX=1 CPUID feature bits
Short Feature Short Feature
0 fpu Onboard x87 FPU sse3 Prescott New Instructions-SSE3 (PNI)
1 vme Virtual 8086 mode extensions (such as VIF, VIP, PIV) pclmulqdq PCLMULQDQ support
2 de Debugging extensions (CR4 bit 3) dtes64 64-bit debug store (edx bit 21)
3 pse Page Size Extension monitor MONITOR and MWAIT instructions (SSE3)
4 tsc Time Stamp Counter ds-cpl CPL qualified debug store
5 msr Model-specific registers vmx Virtual Machine eXtensions
6 pae Physical Address Extension smx Safer Mode Extensions (LaGrande)
7 mce Machine Check Exception est Enhanced SpeedStep
8 cx8 CMPXCHG8 (compare-and-swap) instruction tm2 Thermal Monitor 2
9 apic Onboard Advanced Programmable Interrupt Controller ssse3 Supplemental SSE3 instructions
10 (reserved) cnxt-id L1 Context ID
11 sep SYSENTER and SYSEXIT instructions (reserved)
12 mtrr Memory Type Range Registers fma Fused multiply-add (FMA3)
13 pge Page Global Enable bit in CR4 cx16 CMPXCHG16B instruction
14 mca Machine check architecture xtpr Can disable sending task priority messages
15 cmov Conditional move and FCMOV instructions pdcm Perfmon & debug capability
16 pat Page Attribute Table (reserved)
17 pse-36 36-bit page size extension pcid Process context identifiers (CR4 bit 17)
18 psn Processor Serial Number dca Direct cache access for DMA writes[10][11]
19 clfsh CLFLUSH instruction (SSE2) sse4.1 SSE4.1 instructions
20 (reserved) sse4.2 SSE4.2 instructions
21 ds Debug store: save trace of executed jumps x2apic x2APIC support
22 acpi Onboard thermal control MSRs for ACPI movbe MOVBE instruction (big-endian)
23 mmx MMX instructions popcnt POPCNT instruction
24 fxsr FXSAVE, FXRESTOR instructions, CR4 bit 9 tsc-deadline APIC supports one-shot operation using a TSC deadline value
25 sse SSE instructions (a.k.a. Katmai New Instructions) aes AES instruction set
26 sse2 SSE2 instructions xsave XSAVE, XRESTOR, XSETBV, XGETBV
27 ss CPU cache supports self-snoop osxsave XSAVE enabled by OS
28 htt Hyper-threading avx Advanced Vector Extensions
29 tm Thermal monitor automatically limits temperature f16c F16C (half-precision) FP support
30 ia64 IA64 processor emulating x86 rdrnd RDRAND (on-chip random number generator) support
31 pbe Pending Break Enable (PBE# pin) wakeup support hypervisor Running on a hypervisor (always 0 on a real CPU, but also with some hypervisors)

EAX=2: Cache and TLB Descriptor information

This returns a list of descriptors indicating cache and TLB capabilities in EAX, EBX, ECX and EDX registers.

EAX=3: Processor Serial Number

This returns the processor's serial number. The processor serial number was introduced on Intel Pentium III, but due to privacy concerns, this feature is no longer implemented on later models (PSN feature bit is always cleared). Transmeta's Efficeon and Crusoe processors also provide this feature. AMD CPUs however, do not implement this feature in any CPU models.

For Intel Pentium III CPUs, the serial number is returned in EDX:ECX registers. For Transmeta Efficeon CPUs, it is returned in EBX:EAX registers. And for Transmeta Crusoe CPUs, it is returned in EBX register only.

Note that the processor serial number feature must be enabled in the BIOS setting in order to function.

EAX=4 and EAX=Bh: Intel thread/core and cache topology

These two leaves are used for processor topology (thread, core, package) and cache hierarchy enumeration in Intel multi-core (and hyperthreaded) processors.[12] As of 2013 AMD does not use these leaves but has alternate ways of doing the core enumeration.[13]

Unlike most other CPUID leaves, leaf Bh will return different values in EDX depending on which logical processor the CPUID instruction runs; the value returned in EDX is actually the x2APIC id of the logical processor. The x2APIC id space is not continuously mapped to logical processors however; there can be gaps in the mapping, meaning that some intermediate x2APIC ids don't necessarily correspond to any logical processor. Additional information for mapping the x2APIC ids to cores is provided in the other registers. Although the leaf Bh has sub-leaves (selected by ECX as described further below), the value returned in EDX is only affected by the core on which the instruction is running but not by the subleaf.

The processor(s) topology exposed by leaf Bh is a hierarchical one, but with the strange caveat that the order of (logical) levels in this hierarchy doesn't necessarily correspond the order in the physical hierarchy (SMT/core/package). However, every logical level can be queried as an ECX subleaf (of the Bh leaf) for its correspondence to a "level type", which can be either SMT, core, or "invalid". The level id space starts at 0 and is continuous, meaning that if a level id is invalid, all higher level ids will also be invalid. The level type is returned in bits 15:08 of ECX, while the number of logical processors at the level queried is returned in EBX. Finally, the connection between these levels and x2APIC ids is returned in EAX[4:0] as the number of bits that the x2APIC id must be shifted in order to obtain a unique id at the next level.

As an example, a dual-core Westmere processor capable of hyperthreading (thus having two cores and four threads in total) could have x2APIC ids 0, 1, 4 and 5 for its four logical processors. Leaf Bh (=EAX), subleaf 0 (=ECX) of CPUID could for instance return 100h in ECX, meaning that level 0 describes the SMT (hyperthreading) layer, and return 2 in EBX because there are two logical processors (SMT units) per physical core. The value returned in EAX for this 0-subleaf should be 1 in this case, because shifting the aforementioned x2APIC ids to the right by one bit gives a unique core number (at the next level of the level id hierarchy) and erases the SMT id bit inside each core. A simpler way to interpret this information is that the last bit (bit number 0) of the x2APIC id identifies the SMT/hyperthreading unit inside each core in our example. Advancing to subleaf 1 (by making another call to CPUID with EAX=Bh and ECX=1) could for instance return 201h in ECX, meaning that this is a core-type level, and 4 in EBX because there are 4 logical processors in the package; EAX returned could be any value greater than 3, because it so happens that bit number 2 is used to identify the core in the x2APIC id. Note that bit number 1 of the x2APIC id is not used in this example. However EAX returned at this level could well be 4 (and it happens to be so on a Clarkdale Core i3 5x0) because that also gives a unique id at the package level (=0 obviusly) when shifting the x2APIC id by 4 bits. Finally, you may wonder what the EAX=4 leaf can tell us that we didn't find out already. In EAX[31:26] it returns the APIC mask bits reserved for a package; that would be 111b in our example because bits 0 to 2 are used for identifying logical processors inside this package, but bit 1 is also reserved although not used as part of the logical processor identification scheme. In other words, APIC ids 0 to 7 are reserved for the package, even though half of these values don't map to a logical processor.

The cache hierarchy of the processor is explored by looking at the sub-leaves of leaf 4. The APIC ids are also used in this hierarchy to convey information about how the different levels of cache are shared by the SMT units and cores. To continue our example, the L2 cache, which is shared by SMT units of the same core but not between physical cores on the Westmere is indicated by EAX[26:14] being set to 1, while the information that the L3 cache is shared by the whole package is indicated by setting those bits to (at least) 111b. The cache details, including cache type, size, and associativity are communicated via the other registers on leaf 4.

Beware that older versions of the Intel app note 485 contain some misleading information, particularly with respect to identifying and counting cores in a multi-core processor;[14] errors from misinterpreting this information have even been incorporated in the Microsoft sample code for using cpuid, even for the 2013 edition of Visual Studio,[15] and also in the page for CPUID,[16] but the Intel code sample for identifying processor topology[12] has the correct interpretation, and the current Intel Software Developer’s Manual has more clear language. The (open source) cross-platform production code[17] from Wildfire Games also implements the correct interpretation of the Intel documentation.

Topology detection examples involving older (pre-2010) Intel processors that lack x2APIC (thus don't support the EAX=Bh leaf) are given in a 2010 Intel presentation.[18] Beware that using that older detection method on 2010 and newer Intel processors may overestimate the number of cores and logical processors because the old detection method assumes there are no gaps in the APIC id space, and this assumption is violated by some newer processors (starting with the Core i3 5x0 series), but these newer processors also come with an x2APIC, so their topology can be correctly determined using the EAX=Bh leaf method.

EAX=7, ECX=0: Extended Features

This returns extended feature flags in EBX and ECX.

EAX=7 CPUID feature bits
Short Feature Short Feature
0 fsgsbase Access to base of %fs and %gs prefetchwt1 PREFETCHWT1 instruction
1 (reserved) avx512vbmi AVX-512 Vector Bit Manipulation Instructions
2 (reserved) (reserved)
3 bmi1 Bit Manipulation Instruction Set 1 (reserved)
4 hle Transactional Synchronization Extensions (reserved)
5 avx2 Advanced Vector Extensions 2 (reserved)
6 (reserved) (reserved)
7 smep Supervisor-Mode Execution Prevention (reserved)
8 bmi2 Bit Manipulation Instruction Set 2 (reserved)
9 erms Enhanced REP MOVSB/STOSB (reserved)
10 invpcid INVPCID instruction (reserved)
11 rtm Transactional Synchronization Extensions (reserved)
12 (reserved) (reserved)
13 (reserved) (reserved)
14 mpx Intel MPX (Memory Protection Extensions) (reserved)
15 (reserved) (reserved)
16 avx512f AVX-512 Foundation (reserved)
17 avx512dq AVX-512 Doubleword and Quadword Instructions (reserved)
18 rdseed RDSEED instruction (reserved)
19 adx Intel ADX (Multi-Precision Add-Carry Instruction Extensions) (reserved)
20 smap Supervisor Mode Access Prevention (reserved)
21 avx512ifma AVX-512 Integer Fused Multiply-Add Instructions (reserved)
22 pcommit PCOMMIT instruction (reserved)
23 clflushopt CLFLUSHOPT instruction (reserved)
24 clwb CLWB instruction (reserved)
25 Intel Processor Trace (reserved)
26 avx512pf AVX-512 Prefetch Instructions (reserved)
27 avx512er AVX-512 Exponential and Reciprocal Instructions (reserved)
28 avx512cd AVX-512 Conflict Detection Instructions (reserved)
29 sha Intel SHA extensions (reserved)
30 avx512bw AVX-512 Byte and Word Instructions (reserved)
31 avx512vl AVX-512 Vector Length Extensions (reserved)

EAX=80000000h: Get Highest Extended Function Supported

The highest calling parameter is returned in EAX.

EAX=80000001h: Extended Processor Info and Feature Bits

This returns extended feature flags in EDX and ECX.

AMD feature flags are as follows[19][20]
EAX=80000001h CPUID feature bits
Short Feature Short Feature
0 fpu Onboard x87 FPU lahf_lm LAHF/SAHF in long mode
1 vme Virtual mode extensions (VIF) cmp_legacy Hyperthreading not valid
2 de Debugging extensions (CR4 bit 3) svm Secure Virtual Machine
3 pse Page Size Extension extapic Extended APIC space
4 tsc Time Stamp Counter cr8_legacy CR8 in 32-bit mode
5 msr Model-specific registers abm Advanced bit manipulation (lzcnt and popcnt)
6 pae Physical Address Extension sse4a SSE4a
7 mce Machine Check Exception misalignsse Misaligned SSE mode
8 cx8 CMPXCHG8 (compare-and-swap) instruction 3dnowprefetch PREFETCH and PREFETCHW instructions
9 apic Onboard Advanced Programmable Interrupt Controller osvw OS Visible Workaround
10 (reserved) ibs Instruction Based Sampling
11 syscall SYSCALL and SYSRET instructions xop XOP instruction set
12 mtrr Memory Type Range Registers skinit SKINIT/STGI instructions
13 pge Page Global Enable bit in CR4 wdt Watchdog timer
14 mca Machine check architecture (reserved)
15 cmov Conditional move and FCMOV instructions lwp Light Weight Profiling[21]
16 pat Page Attribute Table fma4 4 operands fused multiply-add
17 pse36 36-bit page size extension tce Translation Cache Extension
18 (reserved)
19 mp Multiprocessor Capable nodeid_msr NodeID MSR
20 nx NX bit (reserved)
21 (reserved) tbm Trailing Bit Manipulation
22 mmxext Extended MMX topoext Topology Extensions
23 mmx MMX instructions perfctr_core Core performance counter extensions
24 fxsr FXSAVE, FXRSTOR instructions, CR4 bit 9 perfctr_nb NB performance counter extensions
25 fxsr_opt FXSAVE/FXRSTOR optimizations (reserved)
26 pdpe1gb Gibibyte pages dbx Data breakpoint extensions
27 rdtscp RDTSCP instruction perftsc Performance TSC
28 (reserved) pcx_l2i L2I perf counter extensions
29 lm Long mode (reserved)
30 3dnowext Extended 3DNow! (reserved)
31 3dnow 3DNow! (reserved)

EAX=80000002h,80000003h,80000004h: Processor Brand String

These return the processor brand string in EAX, EBX, ECX and EDX. CPUID must be issued with each parameter in sequence to get the entire 48-byte null-terminated ASCII processor brand string.[5] It is necessary to check whether the feature is supported by the CPU by issuing CPUID with EAX = 80000000h first and checking if the returned value is greater or equal to 80000004h.

.section .data

s0 : .asciz "Processor Brand String: %.48s\n"
err : .asciz "Feature unsupported.\n"

.section .text

.global main
.type main,@function
.align 32
        pushq   %rbp
        movq    %rsp,   %rbp
        subq    $48,    %rsp
        pushq   %rbx
        movl    $0x80000000,    %eax
        cmpl    $0x80000004,    %eax
        jl      error
        movl    $0x80000002,    %esi
        movq    %rsp,   %rdi

.align 16
        movl    %esi,   %eax
        movl    %eax,   (%rdi)
        movl    %ebx,   4(%rdi)
        movl    %ecx,   8(%rdi)
        movl    %edx,   12(%rdi)
        addl    $1,     %esi
        addq    $16,    %rdi
        cmpl    $0x80000004,    %esi
        jle     get_brand

        movq    $s0,    %rdi
        movq    %rsp,   %rsi
        xorb    %al,    %al
        call    printf
        jmp     end

.align 16
        movq    $err,   %rdi
        xorb    %al,    %al
        call    printf

.align 16
        popq    %rbx
        movq    %rbp,   %rsp
        popq    %rbp
        xorl    %eax,   %eax

EAX=80000005h: L1 Cache and TLB Identifiers

This function contains the processor’s L1 cache and TLB characteristics.

EAX=80000006h: Extended L2 Cache Features

Returns details of the L2 cache in ECX, including the line size in bytes, type of associativity (encoded by a 4 bits) and the cache size.

.section .data

info : .ascii "L2 Cache Size : %u KB\nLine size : %u bytes\n"
.asciz "Associativity : %02xh\n"
err : .asciz "Feature unsupported.\n"

.section .text

.global main
.type main,@function
.align 32
        pushq   %rbp
        movq    %rsp,   %rbp
        pushq   %rbx
        movl    $0x80000000,    %eax
        cmpl    $0x80000006,    %eax
        jl      error
        movl    $0x80000006,    %eax
        movl    %ecx,   %eax
        movl    %eax,   %edx
        andl    $0xff,  %edx
        movl    %eax,   %ecx
        shrl    $12,    %ecx
        andl    $0xf,   %ecx
        movl    %eax,   %esi
        shrl    $16,    %esi
        andl    $0xffff,%esi
        movq    $info,  %rdi
        xorb    %al,    %al
        call    printf
        jmp end
.align 16
        movq    $err,   %rdi
        xorb    %al,    %al
        call    printf

.align 16
        popq    %rbx
        movq    %rbp,   %rsp
        popq    %rbp
        xorl    %eax,   %eax

EAX=80000007h: Advanced Power Management Information

This function provides advanced power management feature identifiers.

EAX=80000008h: Virtual and Physical address Sizes

Returns largest virtual and physical address sizes in EAX.

CPUID usage from high-level languages

This information is easy to access from other languages as well. For instance, the C++ code for gcc below prints the first five values, returned by the cpuid:


int main()
  int a, b;

  for (a = 0; a < 5; a++)
            :"=a"(b)                 // EAX into b (output)
            :"0"(a)                  // a into EAX (input)
            :"%ebx","%ecx","%edx");  // clobbered registers

    std::cout << "The code " << a << " gives " << b << std::endl;

  return 0;

The equivalent code in C is:


int main()
  int a, b;

  for (a = 0; a < 5; a++)
            :"=a"(b)                 // EAX into b (output)
            :"0"(a)                  // a into EAX (input)
            :"%ebx","%ecx","%edx");  // clobbered registers

    printf("The code %i gives %i\n", a, b);

  return 0;

Or, a generally useful C implementation that works on 32- and 64-bit systems:


int main() {
    int i;
    unsigned int index = 0;
    unsigned int regs[4];
    int sum;
    __asm__ __volatile__(
#if defined(__x86_64__) || defined(_M_AMD64) || defined (_M_X64)
        "pushq %%rbx     \n\t" /* save %rbx */
        "pushl %%ebx     \n\t" /* save %ebx */
        "cpuid            \n\t"
        "movl %%ebx ,%[ebx]  \n\t" /* write the result into output var */
#if defined(__x86_64__) || defined(_M_AMD64) || defined (_M_X64)
        "popq %%rbx \n\t"
        "popl %%ebx \n\t"
        : "=a"(regs[0]), [ebx] "=r"(regs[1]), "=c"(regs[2]), "=d"(regs[3])
        : "a"(index));
    for (i=4; i<8; i++) {
        printf("%c" ,((char *)regs)[i]);
    for (i=12; i<16; i++) {
        printf("%c" ,((char *)regs)[i]);
    for (i=8; i<12; i++) {
        printf("%c" ,((char *)regs)[i]);

Another version of that:


void cpuid(unsigned info, unsigned *eax, unsigned *ebx, unsigned *ecx, unsigned *edx)
        "cpuid;"                                            /* assembly code */
        :"=a" (*eax), "=b" (*ebx), "=c" (*ecx), "=d" (*edx) /* outputs */
        :"a" (info)                                         /* input: info into eax */
                                                            /* clobbers: none */

int main()
  unsigned int eax, ebx, ecx, edx;
  int i;

  for (i = 0; i < 6; ++i)
    cpuid(i, &eax, &ebx, &ecx, &edx);
    printf("eax=%i: %#010x %#010x %#010x %#010x\n", i, eax, ebx, ecx, edx);

  return 0;

Microsoft Visual C compiler has builtin function __cpuid() so cpuid instruction may be embedded without using inline assembly. This is handy since x64 version of MSVC doesn't allow inline assembly at all. The same program for MSVC would be:


int main()
  int b[4];

  for (int a = 0; a < 5; a++)
    __cpuid(b, a);
    std::cout << "The code " << a << " gives " << b[0] << std::endl;

  return 0;

For Borland/Embarcadero C compilers (bcc32), native asm function calls are necessary, as there is no asm() implementation. The pseudo code:

  unsigned int a, b, c, d;
  unsigned int InfoType = 0;
  __asm xor EBX, EBX;
  __asm xor ECX, ECX;
  __asm xor EDX, EDX;
  __asm mov EAX, InfoType;
  __asm cpuid;
  __asm mov a, EAX;
  __asm mov b, EBX;
  __asm mov c, ECX;
  __asm mov d, EDX;

Many interpreted or compiled scripting languages are capable of using CPUID via an FFI library. One such implementation shows usage of the Ruby FFI module to execute assembly language that includes the CPUID opcode.

CPU-specific information outside x86

Some of the non-x86 CPU architectures also provide certain forms of structured information about the processor's abilities, commonly as a set of special registers:

  • ARM architectures have a CPUID coprocessor register.[22]
  • The IBM System z mainframe processors support a Store CPU ID (STIDP) instruction since the 1983 IBM 4381[23] for querying the processor ID.[24]
  • The MIPS32 architecture defines a mandatory Processor Identification (PrId) and a series of daisy-chained Configuration Registers.[25]
  • The PowerPC processor has the 32-bit read-only PVR register identifying the processor model in use.[26]

DSP and transputer-like chip families have not taken up the instruction in any noticeable way, in spite of having (in relative terms) as many variations in design.

See also

  • CPU-Z, a Windows utility that uses CPUID to identify various system settings


  1. ^ "Intel 64 and IA-32 Architectures Software Developer’s Manual". Retrieved 2013-04-11. 
  2. ^ "Detecting Intel Processors - Knowing the generation of a system CPU". Retrieved 2013-04-11. 
  3. ^ "LXR linux-old/arch/i386/kernel/head.S". Retrieved 2013-04-11. 
  4. ^ "CPUID, EAX=4 - Strange results (Solved)". Retrieved 2014-07-10. 
  5. ^ a b "Intel® Processor Identification and the CPUID Instruction". 2012-03-06. Retrieved 2013-04-11. 
  6. ^ "Support & Drivers". Retrieved 2014-07-10. 
  7. ^ "Intel® 64 and IA-32 Architectures Software Developer’s Manual". p. 239. Retrieved 18 July 2014. 
  8. ^ Application Note 485: Intel Processor Identification and the CPUID Instruction,  
  9. ^ Linux kernel source code arch/x86/include/asm/cpufeatures.h
  10. ^ Huggahalli, Ram; Iyer, Ravi; Tetrick, Scott (2005). "Direct Cache Access for High Bandwidth Network I/O".  
  11. ^ Drepper, Ulrich (2007), What Every Programmer Should Know About Memory,  
  12. ^ a b Shih Kuo (Jan 27, 2012). "Intel® 64 Architecture Processor Topology Enumeration". 
  13. ^ "Processor and Core Enumeration Using CPUID | AMD". Retrieved 2014-07-10. 
  14. ^ "Sandybridge processors report incorrect core number?". 2012-12-29. Retrieved 2014-07-10. 
  15. ^ "cpuid, __cpuidex". 2014-06-20. Retrieved 2014-07-10. 
  16. ^ "x86 architecture - CPUID". Retrieved 2014-07-10. 
  17. ^ "topology.cpp in ps/trunk/source/lib/sysdep/arch/x86_x64 – Wildfire Games". 2011-12-27. Retrieved 2014-07-10. 
  18. ^ Hyper-Threading Technology and Multi-Core Processor Detection
  19. ^ CPUID Specification,  
  20. ^ Linux kernel source code
  21. ^ Lightweight Profiling Specification,  
  22. ^ "ARM Information Center". Retrieved 2013-04-11. 
  23. ^ "Processor version codes and SRM constants". Retrieved 2014-09-08. 
  24. ^ "IBM System z10 Enterprise Class Technical Guide". 
  25. ^ "MIPS32 Architecture For Programmers, Volume III: The MIPS32 Privileged Resource Architecture". MIPS Technologies, Inc. 2001-03-12. 
  26. ^ "PowerPC Operating Environment Architecture, book III". 

External links and documentation errata

According to this note, the former Intel app note 485, which was specifically about CPUID, is now incorporated in the Intel® 64 and IA-32 Architectures Software Developer’s Manual. As of July 2014 the manual however still directs the reader to the app note 485 for further information. The latest published version of the app note 485, dating to May 2012, is available via processor topology identification.

The big Intel manuals tend to lag behind the Intel ISA document, available at the top of this page, which is updated even for processors not yet publicly available, and thus usually contains more CPUID bits. For example as of this writing the ISA book (at revision 19, dated May 2014) documents the CLFLUSHOPT bit in leaf 7, but the big manuals although apparently more up-to-date (at revision 51, dated June 2014) don't mention it.

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.