 #jsDisabledContent { display:none; } My Account |  Register |  Help Flag as Inappropriate This article will be permanently flagged as inappropriate and made unaccessible to everyone. Are you certain this article is inappropriate?          Excessive Violence          Sexual Content          Political / Social Email this Article Email Address:

# Heat flux

Article Id: WHEBN0014581057
Reproduction Date:

 Title: Heat flux Author: World Heritage Encyclopedia Language: English Subject: Collection: Thermodynamic Properties Publisher: World Heritage Encyclopedia Publication Date:

### Heat flux

Heat flux or thermal flux is the rate of heat energy transfer through a given surface, per unit surface. The SI derived unit of heat rate is joule per second, or watt. Heat flux density is the heat rate per unit area. In SI units, heat flux density is measured in [W/m2]. Heat rate is a scalar quantity, while heat flux is a vectorial quantity. To define the heat flux at a certain point in space, one takes the limiting case where the size of the surface becomes infinitesimally small.

Heat flux is often denoted \overrightarrow{\phi_q}, the subscript q specifying heat rate, as opposed to mass or momentum rate. Fourier's law is an important application of these concepts.

## Contents

• Measuring heat flux 1
• Relevance to science and engineering 2
• References 4

## Measuring heat flux

The measurement of heat flux is most often done by measuring a temperature difference over a piece of material with known thermal conductivity. This method is analogous to a standard way to measure an electric current, where one measures the voltage drop over a known resistor.

## Relevance to science and engineering

One of the tools in a scientist's or engineer's toolbox is the energy balance. Such a balance can be set up for any physical system, from chemical reactors to living organisms, and generally takes the following form

\big. \frac{\partial E_\mathrm{in}}{\partial t} - \frac{\partial E_\mathrm{out}}{\partial t} - \frac{\partial E_\mathrm{accumulated}}{\partial t} = 0

where the three \big. \frac{\partial E}{\partial t} terms stand for the time rate of change of respectively the total amount of incoming energy, the total amount of outgoing energy and the total amount of accumulated energy.

Now, if the only way the system exchanges energy with its surroundings is through heat transfer, the heat rate can be used to calculate the energy balance, since

\big. \frac{\partial E_\mathrm{in}}{\partial t} - \frac{\partial E_\mathrm{out}}{\partial t} = \oint_S \overrightarrow{\phi_q} \cdot \, \overrightarrow{dS}

where we have integrated the heat flux density\overrightarrow{\phi_q} over the surface S of the system.

In real-world applications one cannot know the exact heat flux at every point on the surface, but approximation schemes can be used to calculate the integral, for example Monte Carlo integration.