World Library  
Flag as Inappropriate
Email this Article

Nucleophilic substitution

Article Id: WHEBN0000236445
Reproduction Date:

Title: Nucleophilic substitution  
Author: World Heritage Encyclopedia
Language: English
Subject: Substitution reaction, Mukaiyama Taxol total synthesis, Reaction mechanism, Alcohol, Ethylene oxide
Collection: Substitution Reactions
Publisher: World Heritage Encyclopedia
Publication
Date:
 

Nucleophilic substitution

In nucleophile selectively bonds with or attacks the positive or partially positive charge of an atom or a group of atoms to replace a so-called leaving group; the positive or partially positive atom is referred to as an electrophile. The whole molecular entity of which the electrophile and the leaving group are part is usually called the substrate.[1][2]

The most general form for the reaction may be given as the following:

Nuc: + R-LG → R-Nuc + LG:

The electron pair (:) from the nucleophile(Nuc) attacks the substrate (R-LG) forming a new bond, while the leaving group (LG) departs with an electron pair. The principal product in this case is R-Nuc. The nucleophile may be electrically neutral or negatively charged, whereas the substrate is typically neutral or positively charged.

An example of nucleophilic substitution is the hydrolysis of an alkyl bromide, R-Br, under basic conditions, where the attacking nucleophile is the OH and the leaving group is Br.

R-Br + OH → R-OH + Br

Nucleophilic substitution reactions are commonplace in organic chemistry, and they can be broadly categorised as taking place at a saturated aliphatic carbon or at (less often) an aromatic or other unsaturated carbon centre.[3]

Contents

  • Saturated carbon centres 1
    • SN1 and SN2 reactions 1.1
  • Reactions 2
    • Borderline Mechanism 2.1
    • Other mechanisms 2.2
  • Unsaturated carbon centres 3
  • References 4
  • External links 5

Saturated carbon centres

SN1 and SN2 reactions

A graph showing the relative reactivities of the different alkyl halides towards SN1 and SN2 reactions (also see Table 1).

In 1935, Edward D. Hughes and Sir Christopher Ingold studied nucleophilic substitution reactions of alkyl halides and related compounds. They proposed that there were two main mechanisms at work, both of them competing with each other. The two main mechanisms are the SN1 reaction and the SN2 reaction. S stands for chemical substitution, N stands for nucleophilic, and the number represents the kinetic order of the reaction.[4]

In the SN2 reaction, the addition of the nucleophile and the elimination of leaving group take place simultaneously (i.e. concerted reaction). SN2 occurs where the central carbon atom is easily accessible to the nucleophile.

Nucleophilic substitution at carbon
SN2 reaction mechanism
SN2 mechanism

In SN2 reactions, there are a few conditions that affect the rate of the reaction. First of all, the 2 in SN2 states that there are two concentrations of substances that affect the rate of reaction, substrate and nucleophile. The rate equation for this would be Rate=k[Sub][Nuc]. For a SN2 reaction, an aprotic solvent is best, such as acetone, DMF, or DMSO. Aprotic solvents do not add protons (H+) ions into solution; if protons were present in SN2 reactions, they would react with the nucleophile and severely limit the reaction rate. Since this reaction occurs in one step, sterics drive the reaction speed (primary carbon reacts faster than a secondary which reacts much faster than a tertiary). A primary carbon is not very sterically hindered, whereas a secondary is slightly and a tertiary is extremely sterically hindered. In the intermediate step, the nucleophile is 180 degrees from the leaving group; due to this, the stereochemistry in inverted as the nucleophile bonds to make the product. Also, due to this intermediate being partially bonded to the nucleophile and leaving group, there is no time for the substrate to rearrange itself; the nucleophile will bond to the same carbon that the leaving group was attached to. A final factor that affects reaction rate is nucleophilicity, the nucleophile must attack an atom other than a hydrogen.

By contrast the SN1 reaction involves two steps. SN1 reactions tend to be important when the central carbon atom of the substrate is surrounded by bulky groups, both because such groups interfere sterically with the SN2 reaction (discussed above) and because a highly substituted carbon forms a stable carbocation.

Nucleophilic substitution at carbon
SN1 reaction mechanism
SN1 mechanism

Like SN2 reactions, there are quite a few factors that affect the reaction rate of SN1 reactions. Instead of having two concentrations that affect the reaction rate, there is only one, substrate. The rate equation for this would be Rate=k[Sub]. Since the rate of a reaction is only determined by its slowest step, the rate at which the leaving group "leaves" determines the speed of the reaction. This means that the better the leaving group, the faster the reaction rate. A general rule for what makes a good leaving group is the weaker the conjugate base, the better the leaving group. In this case, halogens are going to be the best leaving groups, while compounds such as amines, hydrogen, and alkanes are going to be quite poor leaving groups. As SN2 reactions were affected by sterics, SN1 reactions are determined by bulky groups attached to the carbocation. Since there is an intermediate that actually contains a positive charge, bulky groups attached are going to help stabilize the charge on the carbocation through resonance and distribution of charge. In this case, tertiary carbocation will react faster than a secondary which will react much faster than a primary. It is also due to this carbocation intermediate that the product does not have to have inversion. The nucleophile can attack from the top or the bottom and therefore create a racemic product. It is important to use a protic solvent, water and alcohols, since an aprotic solvent could attack the intermediate and cause unwanted product. It does not matter if the hydrogens from the protic solvent react with the nucleophile since the nucleophile is not involved in the rate determining step.

Table 1. Nucleophilic substitutions on RX (an alkyl halide or equivalent)
Factor SN1 SN2 Comments
Kinetics Rate = k[RX] Rate = k[RX][Nuc]
Primary alkyl Never unless additional stabilising groups present Good unless a hindered nucleophile is used
Secondary alkyl Moderate Moderate
Tertiary alkyl Excellent Never Elimination likely if heated or if strong base used
Leaving group Important Important For halogens,
I > Br > Cl >> F
Nucleophilicity Unimportant Important
Preferred solvent Polar protic Polar aprotic
Stereochemistry Racemisation (+ partial inversion possible) Inversion
Rearrangements Common Rare Side reaction
Eliminations Common, especially with basic nucleophiles Only with heat & basic nucleophiles Side reaction
esp. if heated

Reactions

There are many reactions in organic chemistry involve this type of mechanism. Common examples include

  • hydrides, for example
R-XR-H using LiAlH4   (SN2)
R-Br + OHR-OH + Br (SN2) or
R-Br + H2O → R-OH + HBr   (SN1)
R-Br + OR'R-OR' + Br   (SN2)

Borderline Mechanism

An example of a substitution reaction taking place by a so-called borderline mechanism as originally studied by Hughes and Ingold [5] is the reaction of 1-phenylethyl chloride with sodium methoxide in methanol.

1-phenylethylchloride methanolysis

The reaction rate is found to the sum of SN1 and SN2 components with 61% (3,5 M, 70 °C) taking place by the latter.

Other mechanisms

Besides SN1 and SN2, other mechanisms are known, although they are less common. The SNi mechanism is observed in reactions of thionyl chloride with alcohols, and it is similar to SN1 except that the nucleophile is delivered from the same side as the leaving group.

Nucleophilic substitutions can be accompanied by an allylic rearrangement as seen in reactions such as the Ferrier rearrangement. This type of mechanism is called an SN1' or SN2' reaction (depending on the kinetics). With allylic halides or sulphonates, for example, the nucleophile may attack at the γ unsaturated carbon in place of the carbon bearing the leaving group. This may be seen in the reaction of 1-chloro-2-butene with sodium hydroxide to give a mixture of 2-buten-1-ol and 1-buten-3-ol:

CH3CH=CH-CH2-Cl → CH3CH=CH-CH2-OH + CH3CH(OH)-CH=CH2

The

External links

13. C.-Y. Shiue, M. Watanabe, A. P. Wolf, J. S. Fowler andP. Salvadori. "Application of the nucleophilic substitution reaction to the synthesis of No-carrier-added [18F]fluorobenzene and other 18F-labeled aryl fluorides." Journal of Labelled Compounds and Radiopharmaceuticals. 24 JUL 2006. DOI: 10.1002/jlcr.2580210607

12. William L. Hase. "Simulations of Gas-Phase Chemical Reactions: Applications to SN2 Nucleophilic Substitution." Science 11 November 1994: Vol. 266 no. 5187 pp. 998-1002. DOI: 10.1126/science.266.5187.998

11. Tschinke, V.; Ziegler, T. A. J. Chem. Phys. 1990, 93, 8051.

10. Lijun Zhou, Zhiming Li, Yue Zou, Quanrui Wang, Italo A. Sanhueza, Franziska Schoenebeck, and Andreas Goeke. "Tandem Nucleophilic Addition/Oxy-2-azonia-Cope Rearrangement for the Formation of Homoallylic Amides and Lactams: Total Synthesis and Structural Verification of Motuporamine G." Journal of the American Chemical Society. 2012 134 (49), 20009-20012.

9. Alhambra, C.; Corchado, J.; Sanchez, M. L.; Gao, J.; Truhlar, D. G. J. Am. Chem. Soc. 2000, 122, 8197-8203.

8. Joseph F. Burnett, Roland E. Zahler. Aromatic Nucleophilic Substitution. Chem. Rev., 1951, 49 (2), pp 273–412. DOI: 10.1021/cr60153a002.

  1. ^ J. March, Advanced Organic Chemistry, 4th ed., Wiley, New York, 1992.
  2. ^ R. A. Rossi, R. H. de Rossi, Aromatic Substitution by the SRN1 Mechanism, ACS Monograph Series No. 178, American Chemical Society, 1983. [ISBN 0-8412-0648-1].
  3. ^ L. G. Wade, Organic Chemistry, 5th ed., Prentice Hall, Upper Saddle RIver, New Jersey, 2003.
  4. ^ S. R. Hartshorn, Aliphatic Nucleophilic Substitution, Cambridge University Press, London, 1973. [ISBN 0-521-09801-7]
  5. ^ 253. Reaction kinetics and the Walden inversion. Part II. Homogeneous hydrolysis, alcoholysis, and ammonolysis of -phenylethyl halides Edward D. Hughes, Christopher K. Ingold and Alan D. Scott, J. Chem. Soc., 1937, 1201 doi:10.1039/JR9370001201
  6. ^ N.S.Imyanitov. Electrophilic Bimolecular Substitution as an Alternative to Nucleophilic Monomolecular Substitution in Inorganic and Organic Chemistry. J. Gen. Chem. USSR (Engl. Transl.) 1990; 60 (3); 417-419.
  7. ^ Unimolecular Nucleophilic Substitution does not Exist! / N.S.Imyanitov. SciTecLibrary

References

When the substitution occurs at the carbonyl group, the acyl group may undergo nucleophilic acyl substitution. This is the normal mode of substitution with carboxylic acid derivatives such as acyl chlorides, esters and amides.

Nucleophilic substitution via the SN1 or SN2 mechanism does not generally occur with vinyl or aryl halides or related compounds. Under certain conditions nucleophilic substitutions may occur, via other mechanisms such as those described in the nucleophilic aromatic substitution article.

Unsaturated carbon centres

In nucleophilic abstraction reaction occurs with a nucleophilic substitution mechanism.

[7][6]

This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
 
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
 
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.
 


Copyright © World Library Foundation. All rights reserved. eBooks from Project Gutenberg are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.